Oregon Scientific BHGR618 User Manual

MULTI-CHANNEL IN-OUT CABLEFREE
INTRODUCTION
Congratulations on your purchase of the Multi-Channel In-Out
Thermometer / Hygrometer (BHGR618) with a 433MHz cable-
free thermo-hygro sensor.
Enclosed with this package is one (1) main display unit and
one (1) cable-free remote thermo-hygro sensor unit.
The main unit has an LCD that shows recordings for indoor
and outdoor temperatures, humidity, maximum and minimum
recordings. The unit supports up to three 433MHz remote
thermo-sensors or thermo-hygro sensors.
No wire installation is required between the main and remote
units. As the BHGR618 operates at 433MHz, it can be used in
the U.S. and most places in Continental Europe.
FEATURES & KEY CONFIGURATION :

MAIN UNIT

A
B
C
D
THERMO-HYGROMETER
MODEL: BHGR618
USER'S MANUAL
F
E
1
A RF SIGNAL INDICATOR
- Indicates the signal-receiving status of the unit
B Upper window
- Displays the temperature data
C Lower window
- Displays the humidity data
D [ IN / REMOTE ]
- Selects between the main-unit display and a selected
remote unit
- Activates search mode
E [ CHANNEL ] button
- Selects among different channels
- Activates remote sensor scanning mode
F [ MEM / CLEAR ] button
- Recalls the maximum or minimum temperature and
humidity readings
- Clears the maximum and minimum temperature and
humidity memory of remote sensor channels or the main
unit display
G [ RESET ]
- Returns all settings to default values and erases all
memories
H [ C/ F ] slide switch
- Selects between degree Centigrade ( C) and Fahrenheit
( F)
H
G