Advertisement
a
The motor is heavy: sustain it with force during the dis-
mantling phase
7
Remove the gearmotor from the bracket by loosening the two
M6x100 screws (E).
6
m
Do NOT remove the fixing bracket (F).
7
8
Fasten the adaptation bracket (G) to the fixing bracket (F) using the
screws, nuts and washers provided ("Figure 9").
8
F
G
E
F
9
Fasten the SPOP bracket (H) to the adaptation bracket (G) using
the screws and washers provided, without tightening the screws
("Figure 10").
9
F
G
H
10
Fasten the SPOP bracket (H) to the adaptation bracket (G) making
sure that it is aligned with the horizontal axis ("Figure 11").
10
F
H
a
Tighten the screws vigorously
G
ENGLISH – 5
Advertisement
