JVC HR-S8006UM Instructions Manual page 89

SELECT "EDIT" FOR PICTURE
CONTROL SET MODE
7
Follow the "Picture Control" section on page 17, then
select "EDIT."
If you are using a JVC Master Edit Control-equipped
camcorder — go to step 8.
If you are not using a JVC Master Edit Control-
equipped camcorder — go to step 9.
NOTE:
When you select "EDIT" to dub tapes, be sure to select
"AUTO" or ("NORM" when "B.E.S.T." is set to "OFF")
after you finish dubbing the tapes.
ENABLE REMOTE PAUSE
FUNCTION
8
Press CH 5∞ or %fi to
move the highlight bar
(arrow) to "AV COMPU-
LINK", then press OK or #
to set to "OFF".
● The REMOTE PAUSE/AV
COMPU-LINK connector
works as the AV
Compulink Playback
connector when "AV
COMPU-LINK" is set to
"ON" ( pg. 21), and
works as the Remote
Pause connector when
"AV COMPU-LINK" is
set to "OFF".
RETURN TO NORMAL SCREEN
9
Press MENU.
START PLAYER
10
Set the camcorder to its play mode.
NOTE:
If the camcorder is equipped with a superimpose/OSD
disable feature then set its superimpose or display
feature to OFF before pressing play.
START RECORDER
11
Set your VCR to its record mode.
● If you are using a Master Edit Control-equipped JVC
camcorder, it can put the recorder automatically into
Record mode. (Refer to camcorder's instruction
manual.)
Downloaded from: https://www.usersmanualguide.com/
FUNCTION
ON
=B.E.S.T.
PICTURE CONTROL AUTO
AUTO TIMER OFF
SUPERIMPOSE ON
AUTO SP = EP TIMER OFF
VIDEO STABILIZER OFF
NEXT PAGE
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
PREVIOUS PAGE
2ND AUDIO RECORD OFF
AUDIO MONITOR HI–FI
S-VHS MODE ON
=AV COMPU LINK OFF
FRONT AUX INPUT VIDEO
REAR AUX INPUT VIDEO
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
NOTE:
If you use an auxiliary input to connect a cable box or DBS
receiver, make sure that the correct AUX INPUT ("VIDEO" or
"S-VIDEO") is selected after you have finished editing (
4 – 6, pg. 38).
39
EN
steps