Oregon Scientific WR103 User Manual page 11

Weather & emergency alert monitor
Table of Contents

Advertisement

A county can be subdivided as follows:
1
Northwest
2
North Central
3
Northeast
4
West Central
5
Central
6
East Central
7
Southwest
8
South Central
9
Southeast
To select to receive all warnings or only warnings
from specified localities:
1.
Press COUNTY to enter the county-code display
from any clock display mode.
2.
Press
or
to switch between receiving all (ALL)
warnings or only warnings from specified local
areas [----].
If (1-6) [----] (specified local area) is selected,
NOTE
local county codes need to be programmed into the
unit.
To enter the appropriate county code:
1.
Press COUNTY to enter the county-code display
from clock-display mode.
2.
Press COUNTY to bypass the county-code field 0
and advance to county code field 1.
3.
To enter the county-code in this field, press and hold
COUNTY for 2 seconds. The extreme left county-
code digit will flash.
4.
To enter the first county-code digit, press
Remember: This part of the code subdivides a county
into localized sub-sections. If the county code has not
been subdivided into smaller sub-sections, select (0) in
the far left column.
5.
Enter the remaining 5 digits by following the same
process. Press COUNTY followed by
11
or
.
or
.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wr103n

Table of Contents