Table of Contents
Advertisement
USER MANUAL • 11 • TECHNICAL INFORMATION & MEASUREMENT DATA
SPECIFICATIONS
Sealed Enclosure: Solid MDF with 1.5" front & 5/8" rear baffle
Weight:
Dimensions:
OmniMount Inserts:
on the back of the cabinet, for attachment of OmniMount
type 60 brackets (www.omnimountpro.com) or Powerdrive
type 100 brackets (www.mypowerdrive.com).
Frequency Response:
Crossover:
Sensitivity:
Impedance:
Recommended Amplifier Power:
1" Tweeter
Dual concentric diaphragm with integral wave-guide
High-power ferrite motor structure
Fully video shielded
6.5" Hemispherical Woofer
6.5" high excursion woofer with vented motor
Cast aluminum frame
1.5" Aluminum voice coil
Copper shorting ring for lower distortion
Ultra low power compression design
Mica filled polypropylene cone w/ Rubber surround
Fully video shielded
Page 12 • User Manual • Technical Information & Measurement Data
I/ON
21 pounds- 9.5 kg
See page 13
Four 1/4" x 20 inserts, located
80 Hz to 20kHz +/- 3 dB
2.0 kHz 4th order
85 dB SPL (2.82V RMS)
6 Ohms nominal / 5.5 Ohms
minimum
100 to 200 Watts
TM
On axis response versus vertical average,
with the grille attached.
On axis response versus horizontal
average, with the grille attached.
On axis response versus listening window,
with the grille attached.
Advertisement
Table of Contents
