Table of Contents
Advertisement
Chengdu Ebyte Electronic Technology Co.,Ltd.
User Manual
Figure 4-26 D1258C00000310 Receiver configuration writing steps
D. The second communication parameter is configured in pairs: check the communication mode of the product model →
check the writing procedure of the second communication configuration according to the communication mode → refer
to the chapter "parameter reading, description and writing of the second communication mode".
Example: The second communication method is: LoRa wireless spread spectrum. In the second communication
configuration writing step, it is necessary to configure the LoRa channel, LoRa address, and LoRa airspeed of the sender
and the receiver to be the same. For details, see the "Second Communication Method: LoRa" chapter.
4.4.7 Transparent transmission of the first communication method: open and
write the data remote transmission function
(1) Turn on the 485 transparent transmission function
a. Steps (as shown in Figure 4-21 below): Open the "Interconnection Network IO Setting Tool" → select the correct
COM port number and correct (default) parameters → click "Open Serial Port" (if the parameters have been changed and
forgotten, the factory settings can be restored , operate according to method 1) → "Search/Read Device" → "4. Mode
Configuration" → RS485 Transparent Transmission drop-down to select "On", pairing mode select "One-to-One", RS485
transparent transmission filter input value according to the usage ( Default 0) → Click "Write" in "4. Mode
Configuration" → observe the log column, prompting success → Click "Save" → Click "Restart" → Finish.
b. Next, check → Repeat the chapter "Mode Configuration Parameter Read" to confirm whether the configuration is
successful.
Chengdu Ebyte Electronic Technology Co.,Ltd.
46
Copyright ©2012–2020，
Advertisement
Table of Contents
