Chengdu Ebyte Electronic Technology Co.,Ltd.
IV.Configuration software driver installation, each function parameter
reading, description and writing
Serial tool installation, configuration software installation, basic parameters, device properties, I/O configuration, mode
configuration, etc.
4.1 Configuration software tools and driver installation
Windows system computer
USB to 485 tool
ProductsSwitching Power Supply/Power Adapter
Product
Wire
CH340 driver (serial port driver)
Mircosoft.Net_Framework_4.0 and above computer environment
driver
Interchange Industrial Network IO Setting Tool.exe
4.1.1 Configuration software tools and driver installation package download
(1) Method 1: Go to the official website: www.cojxu.com → click "Download" → "Point-to-point remote follow-up" →
click "LoRa 433M" → find "Pair Transmission Industrial Network IO Setting Tool", download the compressed package
and unzip it .
(2) Method 2: Enter the official website:
http://www.cojxu.com/data-download.html?id=47&pid=33#load
4.1.2 Configuration software tools and driver installation
(1) First confirm whether the "CH340 driver" has been installed. If already installed, skip this step.
Confirmation method: Plug the "USB to 485" into the USB port of the computer (as shown in Figure 4-1 and Figure 4-2)
→ right-click on "My Computer/This Computer" → "Management" → "Device Manager" → "Ports" "In the drop-down
option, you will see the driver of CH340/CH341 → it means it has been installed, otherwise, it is not installed. (For
different computers and configurations, the viewing steps are similar.)
Chengdu Ebyte Electronic Technology Co.,Ltd.
Copyright ©2012–2020,
Bill of materials used in this chapter
Items
User Manual
Quantity/Remarks
1 set
1
1
Some
Some
Computer driver
installation package
Computer driver
installation package
Configure the software
installation package
26