How To Use The Menu - Optoma Pico PK201 User Manual

U T S
SING A RIPOD TAND
1. Screw a standard tripod into the
screw hole on the projector.
D PC S
OWNLOADING THE
Use the PC software to encode and transfer all file types to the
Projector.
To install the PC software:
1. Connect the Projector for data transfer (see previous item).
2. Browse the Projector internal memory (like a USB memory stick)
for a folder called "PC Software".
3. In this folder, double-click on the file called "Setup" or "setup.
exe" to begin the installation process, then follow the on screen
instructions.
Note: You can find Arcsoft license key on Quick Start Guide
4. After the installation, the "Arcsoft Media Convertor" application is
launched.
5. To convert and transfer files to the Projector, drag and drop files
to the Arcsoft Media Convertor application window.
THIS PRODUCT IS LICENSED UNDER THE MPEG-4 VISUAL PATENT
PORTFOLIO LICENSE FOR THE PERSONAL AND NON-COMMERCIAL USE OF
A CONSUMER FOR (i) ENCODING VIDEO IN COMPLIANCE WITH THE MPEG-
4 VISUAL STANDARD ("MPEG-4 VIDEO") AND/OR (ii) DECODING MPEG-4
VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL
AND NONCOMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO
PROVIDER LICENSED BY MPEG LA TO PROVIDE MPEG-4 VIDEO.
NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE.
ADDITIONAL INFORMATION INCLUDING THAT RELATING TO PROMOTIONAL,
INTERNAL AND COMMERCIAL USES AND LICENSING MAY BE OBTAINED
FROM MPEG LA, LLC. SEE HTTP://WWW.MPEGLA.COM.
S
WITCH ON
1. Press the Power button.
OFTWARE
A P
DJUSTING THE ROJECTED
Projection Distance (A) Screen Size - Width (B)
Meter inch (mm)
0.245 9.6 111
0.500 19.7 227
0.700 27.6 318
0.975 38.4 443
1.500 59.1 682
2.000 78.7 909
2.500 98.4 1136
3.215 126.6 1461
B
H U M
OW TO SE THE ENU
Main menu
Item
F
I
MAGE
Screen Size - Height (C) Screen Diagonal (D)
(inch) (mm) (inch) (mm)
4.4 63 2.5 128
8.9 128 5.0 261
12.5 179 7.0 365
17.4 249 9.8 508
26.8 384 15.1 782
35.8 511 20.1 1043
44.7 639 25.2 1304
57.5 822 32.4 1677
1
1. Adjust Focus ( 1 ) until image is
clear.
1. Display the Main Menu. (
2. Highlight the desired option (
3. Enter the desired option. (
4. Highlight the desired item. (
5. Select the item. ( )
6. Press ( ) to go up one directory.
Under external signal mode, press (
to bring out the OSD.
• The OSD disappears in 5 seconds if
there is no OSD operation.
• The projector will automatically shut
down if the projector is left idle at
its main menu or file browser for 3
minutes.
<Note>
External signal mode is applicable for
connecting VGA, Composite, HDMI and
Component signals.
<Note>
The first time you use the projector, you
can select your preferred language from
the quick menu after the startup screen
displays.
(inch)
5.0
10.3
14.4
20.0
30.8
41.1
51.3
66.0
)
)
)
)
▲▼
)
5