Advertisement
Quick Links
ASS E MBLY G UI DE FOR
LE GA C Y
AD IR ON D A CK
RE QUIRED TO OLS
(4) SCREWS
IM P ORTANT NOTE
The Legacy Adirondack is designed for
on-deck use only.
HEX SCREWDRIVER
Align the tabs on the Adirondack back with
STEP 1:
the slots in the base. Insert with a forceful push
down until secure.
Starting with either side, position the
STEP 2:
armrest onto the base, aligning the front screw
holes. Using the hex screwdriver, assemble using (1)
screw in the hole.
Assemble all screws loosely. Thoroughly tighten all screws in Step 5.
Advertisement
Related Manuals for LEDGE LEGACY ADIRONDACK
Summary of Contents for LEDGE LEGACY ADIRONDACK
- Page 1 Insert with a forceful push down until secure. (4) SCREWS HEX SCREWDRIVER IM P ORTANT NOTE The Legacy Adirondack is designed for on-deck use only. Starting with either side, position the STEP 2: armrest onto the base, aligning the front screw holes.
- Page 2 Align the rear screw holes. RO UTINE C LEANING STEP 3: Assemble using (1) screw. For routine cleaning, just use water and a soft cloth or microfiber towel, or spray down with a water hose. For a deeper clean, use mild soap and water and a soft bristle brush.
Need help?
Do you have a question about the LEGACY ADIRONDACK and is the answer not in the manual?
Questions and answers