Advertisement
Available languages
Available languages
Cleaning the Air Conditioner
Cleaning has to be carried out at regular
intervals to ensure the unit is at optimal
performance. A dirty unit may cause
malfunction and you may retrieve "H 99"
error code. Consult an authorised dealer.
• Before cleaning, switch off the power supply and
unplug the unit.
• Do not touch the aluminium fi n as the sharp parts
may cause injury.
• Do not use benzine, thinner or scouring powder.
• Use soap (
pH 7) or neutral household
detergent only.
• Do not use water hotter than 40 °C / 104 °F.
Indoor unit
Do handle the unit surface with
care to avoid scratches by sharp
or rough items (e.g. fi ngernails,
tools, rings, etc). Wipe the unit
gently with a soft damp cloth.
The coils and fans should be cleaned periodically
by an authorised dealer.
Front panel
Wash gently and dry.
How to remove front panel
1 Raise up.
Close it securely
1 Hold horizontally.
3 Close down.
4 Press both ends and center of the front panel.
Indoor unit
( Structure of the unit may vary depending on
the model)
Front panel
Outdoor unit
Clean the debris that surround the
unit.
Clear any blockage from the drain
pipe.
nanoe
Once every 2 weeks
• Clean with dry cotton bud.
• Do not touch during operation.
Air fi lters
Once every 2 weeks
• Wash/rinse the fi lters gently with
A
water to avoid damaging the
surface.
B
• Dry the fi lters thoroughly under a shade, away
from fi re or direct sunlight.
2 Slide the
front panel to
• Replace any damaged fi lters.
right
and
A
Remove air fi lter
pull out
.
B
2 Match and
Remove from the unit
push in.
Aluminium fi n
Air fi lters
nanoe
-G Generator
TM
Attach air fi lter
Insert into the unit
-G Generator
TM
21
Advertisement
