Pairing With Phone; Volume Control - Mapmyindia MAPPLS NavAudio User Manual

Pairing with Phone

Bluetooth
NavAudio
Red and Blue light flash

quickly "Pairing"

Turn on the "Bluetooh" of the
cellphone, find and pair the
NavAudio
Pairing Successful
Blue light slow flashes twice

"pairing Successful"
"connected"

Volume Control

Press to minimize the volume
5 Sec
To pair/connect Navaudio with
1
your phone:
1. Press and hold the Power
Button for 5 seconds to enable
Bluetooth or enter pairing
mode. When the blue and red
LEDs blink continuously,
NavAudio will be discoverable
by your mobile phone's Blue
2
tooth
2. Turn on "Bluetooth" on your
phone and connect it to
NavAudio.
3.If no device is paired within
2 minutes, pairing mode will
be disabled, and the device
will enter standby mode.
While in standby mode,
Navaudio will not be discover
able by other phones.
Current battery status will
Show on the cellphone
(The cellphone must
support HFP)
Press to maximize the volume
4