Setup | Signal
" Signal" menu is
only supported in
Analog VGA (RGB)
signal.
Phase
"Phase" synchronizes the signal timing of the display with the
graphic card. If you experience an unstable or flickering image,
use this function to correct it.
Frequency
"Frequency" changes the display data frequency to match the
frequency of your computer's graphic card. If you experience a
vertical flickering bar, use this function to make an adjustment.
H. Position
Press the
to move the image left.
Press the
to move the image right.
V. Position
Press the
to move the image down.
Press the
to move the image up.
User Controls
35
English