Optoma EW330 Brochure page 18

User Controls
Remote Control
8
English
Using the Remote Control
Power
Laser
Button
PC/ Mouse
Control
Enter
Keystone
+/-
R Button
Page +
Brightness
Source
Enter
Re-Sync
Menu
Page -
Zoom
Refer to the "Power On/Off the Projector"
section on pages 13-14.
Aim the remote at the viewing screen,
press and hold this button to activate the
laser pointer.
The PC/ Mouse Control can be used to
control mouse movement. The mouse
function is enabled using the USB cable to
connect your computer and the projector.
Confirm your item selection/Mouse Left
Click
Adjust image distortion caused by tilting
the projector.
Mouse Right Click
Use the button to page up.
Adjust the brightness of the image.
Press "Source" to select the input signal
source at the next terminal.
Confirm your item selection.
Automatically synchronize the projector to
the input source.
Press "Menu" to launch the on-screen
display (OSD) menu. To exit OSD, Press
"Menu" again.
Use the button to page down.
Zoom the projector display in or out.