Page 4
Use of other accessories may not ensure compliance with FCC RF exposure guidelines. European Conformity Statement Unitech Electronics co., Ltd herewith declares that the Unitech product is in compliance with the essential requirements and all other provisions of the RED 2014/53/EU directive.
Page 6
Waste electrical and electronic equipment (WEEE) Unitech has set up a policy and process to meet the 2012/19/EU concerning electronic waste disposal. For more detailed information of the electronic waste disposal of the products you have purchased from Unitech directly or via Unitech’s resellers, you shall either...
It may not be functional anymore. Please only use the original battery from Unitech. Using a third party battery can damage our products. Please note that when such damage occurs, it is not covered by Unitech’s warranty policy.
Unitech product for charging. Please remove the power adapter when the battery is fully recharged. The bundled power adapter that comes with your Unitech product is not meant to be used outdoors. An adapter exposed to water or rain, or a very humid environment can cause damage to both the adapter and the product.
Worldwide Support Unitech’s professional support team is available to quickly answer questions or assist with technical-related issues. Should an equipment problem occur, please contact the nearest Unitech regional service representative. For complete contact information please visit the Web sites listed below: Taipei, Taiwan –...
The warranty period is varied from each country. Please consult with your supplier or Unitech local office for actual length of warranty period to your purchased product. Warranty becomes void if equipment is modified, improperly installed or used, damaged by accident or neglect, or if any parts are improperly installed or replaced by the user.
SP320 User’s Manual Chapter 1 - Overview 1.1 Package Please make sure the following contents are in the SP320 gift box. If something is missing or damaged, please contact your Unitech representative. Standard accessories SP320 (1 set) Battery (1 pcs)
Page 27
1.5.4 How to Attach Belt Buckle 1. Pick out the two circle fillers. 2. Align two screws of the belt buckle with the two holes on the SP320 printer. The side with the screws are pointing down. Lock two screws by spinning the screw clockwise.
Page 33
SP320 User’s Manual 2.2.2 Bluetooth Communication SP320 provides dual-mode Bluetooth 5.0 (SPP+BLE) to communicate with iPhone, iPad, Android model, with the effective distance no more than 10 meters. The default pairing password of Bluetooth is 0000, and the parameters can be set through the setting tool.
Need help?
Do you have a question about the SP320 and is the answer not in the manual?
Questions and answers