Fizz Creations Harry Potter groovy Instruction Manual page 3

OPERATION - BATTERIES
1. Begin to loosen the screw until roughly half is Fig. 1
protruding, then pull to remove the battery cover
(Fig.1). Insert 3 x 1.5v AAA alkaline batteries (not
supplied) into the battery compartment.
Ensure batteries are inserted correctly.
2. Securely screw battery cover back onto base
unit to prevent access to the batteries by a small
child.
3. Slide the ON/OFF button (Fig.1) in the
appropriate direction to turn the light on or off.
4. To change the batteries, follow steps 1-2 with
the exception of removing the used batteries from
the unit and disposing of them safely and securely,
ensuring they are not accessible by small children.
WARNING! This is not a toy.
BATTERY INSTRUCTIONS
Requires 3 X AAA, 1.5V batteries (not included)
HOW TO INSERT BATTERIES.
Unscrew the battery cover using a screwdriver. Insert fresh batteries following the polarity marked on the
product. Replace the cover and secure with a screwdriver.
Different types of batteries or new and used batteries are not to be mixed. Only batteries of the same
equivalent type as recommended are to be used. Batteries are to be inserted with the correct polarity
(+ and -). Exhausted batteries are to be removed from the product. If using rechargeable batteries, charge
under adult supervision and remove before charging. Non rechargeable batteries are not to be recharged.
The supply terminals are not to be short-circuited. Do not throw batteries into a fire. Batteries should never
be left in the product when not in use for a long period of time.
WEEE Statement - Electric and Electronic devices as well as batteries must not be disposed of with
household waste. For more information about where you can drop off your waste product for recycling
please contact your local authority.
EN