ALZA choetech BS008 User Manual page 11

The above output icon
flashes and beeps
The temperature warning
icon flashes and beeps.
The icon of connecting to the
AC mains flashes and the
product cannot be charged.
UPS Mode
UPS Feature
This product has the function of backup uninterruptible power supply. The usage and
operation precautions are as follows:
As shown in Pic 1 below, when the product is connected between the wall socket and the
electrical appliance, and the power supply and AC switch of the product are in the ON
state, the product enters the UPS working mode. The AC mains in the socket supplies
power to the electrical appliance through the bypass circuit, and also charges the product.
In this working state, the rated power off the electrical appliance must be lower than
1100W, otherwise overload protection may be triggered.
circuited.
The temperature of the
prod – uctis too hight or too
low.
The charging cable is poorly
connected.
The overload protection
function is enabled.
11
the area corresponding to
the icon to remove the
alarm.
Take the product out of the
charging state remove all
loads, turn the power off,
wait for the device to reach
a suitable working
temperature, then the
alarm is removed.
The overload protection
function is enabled.
1. Turn off the power
button and unplug all
ports.
2. After confirming that
there is no abnormality
in each part, turn on the
power button.
3. Press the overload
protection button,
connect the AC cable to
restore the AC input.