Download Print this page

Transmitter Solutions RECTSMINI2OUT Manual Installation page 4

External mini receiver

Advertisement

7 - USABLE TRANSMITTERS
The receiver type MINI 2 OUT, can be used with the
following types of transmitters:
Stingray 433TSPW1V, 433TSPW2V
Monarch 433TSPW1K, 433TSPW2K
Any changes or modifications on equipment not expressly approved by the Transmitter Solutions could void the
user's authority to operate with the equipment.
The warranty period of Transmitter Solutions receivers is 24 months, beginning from the manufacturing date of
the transmitter.
During this period, if the product doesn't operate correctly, due to a defective component, the product will be
repaired or replaced at the sole discretion of Transmitter Solutions.The warranty does not extend to the receiver
case which can be damaged by conditions outside the control of Transmitter Solutions.
Press P1 until the red LED DL3 turns on.
Press button A on the transmitter to delete it from the receiver.
Operation will be confirmed by DL3 and DL4 blinking twice.
To delete button B press P1 twice.
At this point the second red LED DL4 will flash.
Press button B on the transmitter to delete.
Deleting all Transmitters
Keep the button
switches on, release it, push it again and keep it pushed
down until 3 blinks of the red led
occur. In this way the memory is completely cancelled.
9 - MEMORY FULL
In case of full memory, that means
already stored, if one tries to store an extra transmitter,
a sequence of 3 blinks of
the operation fails.
Notice
GUARANTEE
2480 South 3850 West, Suite B
Salt Lake City, UT 84120
(866) 975-0101 • (866) 975-0404 fax
www.transmittersolutions.com
8 - DELETING TRANSMITTERS
P
1
pressed down until the first red led
DL3
and green led
DL4
85
transmitters are
DL3
and
DL4
occurs and
D
L
3

Advertisement

loading