Related Manuals for KAT VR Walk mini S
Summary of Contents for KAT VR Walk mini S
- Page 1 Walk mini S OWNER'S MANUAL Please, read this instruction manual carefully and keep it safely stored for future use. This product is a commercial product.
- Page 2 Declaration Sensor Calibration Safety Instructions Walk mini S Operating Instructions Health Warnings Walk mini S Quick Operating Instructions -- ONLY 3 Steps to go Product Introduction Walk mini S First Use Product Description Stepping On KAT Walk mini S Description...
-
Page 3: Safety Instructions
To avoid damage to the platform or personal harm, please use our special shoe covers, the dedicated shoes and the safety harness according to the instructions. The KAT Shoe covers are to be used with the Walk mini S only and it is forbidden to use them for any other purpose. -
Page 4: Product Introduction
KAT VR will not be responsible. Walk mini S Description KAT Walk mini S is a second-generation Virtual Reality Treadmill tailored entirely for VR Arcades and industry training applications. Integrating our enhanced natural walking technology with... - Page 5 Product Appearance Product Parameters 14-60 years Suitable age Back Support Suitable weight 130kg and below Height Adjuster Suitable height Harness Product weight Safety Buckle Hooks Seat Range of waist Rotation Lock Adjustable Buckles Length of leg straps Leg Straps Connecting Wire Base plate height Supporting Rods LED Lights...
-
Page 6: Software Description
Tool preparation before unboxing two primary functions: Content Library and Controller Settings. Before unboxing the Walk mini S, please prepare a pair of scissors, a screwdriver and a claw hammer, wear protective gloves as well as the appropriate footwear for such handiwork, slippers or high-heeled shoes are unsuitable. -
Page 7: Unpacking Method
17*19mm, 20mm, 1 piece of each total). and tap until it is facing up Tools Phillips screwdriver 4 inches Level 18mm*9mm Walk mini S owner's manual Special shoe covers Accessories Hexagon socket button For installation head Screw M8 X 16 Hexagon socket button... - Page 8 Product Installation and Assembly Assembly of the Back Support Due to necessary quality control testing in the factory, minor scratches may be found on component connections but they will not affect the normal operation of Assembly of the Base the device. 85KG Remove the base frame Lift up the base which...
- Page 9 Unscrew the screws from Insert the bolts of the back Tighten the screws on each Fasten the supporting rod Pull out the triple-end Slowly place the shell the back support. support to the square holes side to the vertical tube at with the 2 velcro straps on cable with power cord and with the sticker "5"...
- Page 10 Content Library (1). The software dashboard allows to easily add your local industry application content and game content into The Content Library to experience them on your Walk Mini S devices. Method of adding new content: 1)Adding industry applications First select the classification "Industry Application"...
- Page 11 Library Manage 2)Upload the content cover and detailed pictures, fill in the application name, application introduction, select the root file path and application type, and click the "Save" button. To open the library management panel (5), first go to the library page and click the (Information marked with * symbol is required) (3) "Manage"...
- Page 12 2)Editing Content To edit the content, click the "Edit" button on its right. After changing the content information, click the "Save" button (6). 3)Deleting Content To delete content from here, click the "Delete" button on the right (5). Controller Dashboard The Controller Dashboard shows the device Connection Status, Parameter Setting, Calibration button and Real-Time Data (7) 3)Calibration...
-
Page 13: Starting The Applications
Settings (10) Then, click the "Start" button. The application will now either start, or if there are any connection errors of the device, HMD or SteamVR, a pop-up window will appear. Settings include all the options as shown below with the language, software appearance and software management settings. - Page 14 Closing the Application To close the application, click the "End Application" button in the top right corner (13). After receiving the newest version of the program provided by KAT VR after-sales service personnel, start installation as below (15). The version number shown below is an example:...
-
Page 15: First Use Instructions
First Use Instructions Sensor Calibration If any of the situations below occurred before using the Walk mini S, the orientation of the sensor should be calibrated in order to correctly map your physical actions into the VR game Sensor Instructions or simulation. - Page 16 Walk mini S Operating Instructions Walk mini S First Use Stepping On Walk mini S Quick Operating Instructions -- ONLY 3 Steps to go Unlock the rotational safety Rotate the supporting rods Lock the rotational safety STEP 1 STEP 2 STEP 3 mechanism.
-
Page 17: Height Adjustment
Height Adjustment Harness Wearing This procedure is crucial! Improperly fastened harness will affect your walking experience! Lift the back of the harness, This is the highest possible For lowering, slightly lift up adjust it to a comfortable position. the harness with both hands. Lean closely against the inner Buckle up the harness To tighten the harness, pull... - Page 18 Height Adjustment Stepping Off Once strapped yourself in Try to sit down. Tr y to c ro u c h . （ I f yo u Rotate the supporting rods L o c k t h e r o t a t i o n a l After removing your VR encounter jamming of the securely, try to step forward.
-
Page 19: Software Instructions
Disassembly Procedure Operating system: Windows 10. If you need to move the Walk mini S, strictly follow the product's assembly instructions in the reverse order. Disassemble with caution to keep the main components intact. USB port: 3 x USB 3.0 or above After dismantling the device, gently place it in its original box and use similar material to package it. -
Page 20: Appendix 1：Optional Accessories List
Appendix 1：Optional Accessories List Optional Accessories List Name Quantity Appearance Note For a better experience, we also offer a variety of accessories that you can choose to match. Optional Accessories List Name Quantity Appearance Note HTC VIVE PRO set F o r m o r e i n f o r m a t i o n , Base stand 1 s et i n c l u d e s VR Headset:... -
Page 21: Appendix 2：Kat Station
Display, High-performance PC, 2-in1 Software Platform – Business Management System, and a 3D Surround Sound Stereo System. The device is an all-in-one solution aimed to provide easy access, maintenance, and management of the KAT VR equipment while ensuring the best quality audio-visual experience. -
Page 22: Installation Steps
Installation steps 5.Using the connector, install the beam on the support and fix it well with screws (M8*20) 1.Take off the packing box cover and take out the components 2.Place the crate upright and take out the control center 6.Remove the screws on the Control Center's top back plate. 3.Install the anti-tipping support in front of the device and fix well with screws (M4*20_3) on both sides. - Page 23 8.Once the Station 2.0 is moved to the intended area of use, turn the supporting feet 11.Once the HMD cable is inserted into the beam, place the seal plate back on the structure clockwise to sit them on the ground. and fix it well with screws.
-
Page 24: Frequently Asked Questions (Faq)
5）Please adjust the safety harness to your body, and tighten it up to avoid any loose Product Instruction Files space between your back, and the back support. It is not possible to move, or the motion is too slow on Walk mini S. What Product's maintenance and repairs should I do? - Page 25 LED lights on my Walk mini S are not lighting up. The device used to work normally, but recently the software runs slower, and sometimes it even crashes. What should I do ？ 1）Please check if the LED light's DC, the power adapter, and the power cord are all correctly plugged in.
Need help?
Do you have a question about the Walk mini S and is the answer not in the manual?
Questions and answers