Vectra Fitness H1 Quick Reference Manual page 10

Capturing Images with H1 Tethered to Computer
2 Repeat until each of the requested landmarks has
been placed. If you wish to change the position of a
landmark, position the tip of the cursor arrow over it.
The cursor changes to an open hand when it's close
enough to the landmark. Click and drag (the cursor
changes to a grabbing hand). Release the mouse
button when the landmark is in the correct position.
3 When you are satisfied with the manual landmarks,
retry stitch. VECTRA software completes the
click
automatic stitching process and displays the completed
image in Face Sculptor.
10
VECTRA H1 Tethered Capture
Q U I C K R E F E R E N C E G U I D E