Table of Contents
Advertisement
Program memory
•
Stop programs you are not currently using. In most cases, programs automatically stop
to free needed memory. However, in some situations, such as when confirmation dia-
log boxes are waiting for a user response, the program may not be able to automati-
cally stop. To check the state of your active programs, tap
System tab, tap Memory then the Running Programs tab. Tap the program you want
to view, then tap Activate. Close any open windows or messages and return the pro-
gram to list view. If this doesn't work, you can stop the program manually. First, make
sure that your work is saved by closing open items and returning the program to list
view. Then, stop the program by tapping Stop or Stop All on the Running Programs
tab.
•
Clear storage memory as described in the preceding section. This will free some stor-
age memory so that it can be allocated to program memory.
•
Reset your iPAQ H3000, as described in
earlier in this appendix.
Screen Freezes or Responds Slowly
Reset your iPAQ H3000. See
appendix. If the symptom continues, you may have run out of memory. Check your mem-
ory usage and clear storage memory as described above.
Screen is Blank
If the iPAQ H3000 doesn't respond when you briefly press the Power button, press and
hold the button for a full second. If that doesn't work, try the following in order until the
problem is resolved:
•
Plug the iPAQ H3000 into AC power.
•
Reset the iPAQ H3000. See
appendix.
Screen is Dark
Prolonged exposure to direct sunlight may cause your iPAQ H3000 screen to temporarily
darken. This is normal for LCD screens and is not permanent.
a-6
Tips and Troubleshooting
"Reset the iPAQ H3000 and Clear
"Reset the iPAQ H3000 and Clear
"Reset the iPAQ H3000 and Clear
then Settings. On the
Memory",
Memory", earlier in this
Memory", earlier in this
Hide quick links:
Advertisement
Table of Contents
