Filter Replacement - Momax Robust AP8S Instruction Manual

Filter Replacement

This device has a memory function. After a total of 2200 hours of
operation, you will see the filter icon flickers in red on the LED display. After
filter maintenance, press & hold the Wind Speed / Filter Button "
7 secs to restart a new memory.
1. Remove filter cover on the back of the unit by pressing the switch in the
filter cover.
2. Remove filter from its packing and replace it.
3. Close the filter cover.
4. Tap and hold the wind speed / filter button for 7 seconds to reset the
unit after installing the new filter.
1.
2.
16
" for
3. 4.
About Filters and UV-C
Structures
Green mesh filter with
H13
very fine glass threads
HEPA with a diameter of
less than 1 micron
Filter
(0.001mm)
Black hexagonal
Active
honeycomb filter with
Carbon
a bed of active carbon
with antibacterial
Filter
coating
UV-C
LED UV-C Light
Active carbon filter
• A irborne particles of 0.3
micron
• P M2.5 (fine particulate
matter with size less than
2.5 microns)
• A erosols of 0.3 – 10
micron
• A llergens (e.g. Dust mites,
pollen, mold spore, etc.)
• VOCs
• U nwanted air odors
(smoke, pet, common
household chemicals etc.)
Kills or inactivates the
airborne infectious
particles (e.g. germs, mold
spore, etc.) that circulate
throughout the space.
17