Advertisement
Quick Links
Manual Smart Key Go Mini
Features
Three connection modes: Open connection (convenience mode), Bluetooth
•
pairing (pairing mode), AES 128-bit encryption Challenge response
system (secure mode)
•
Can be combined with a variety of accessories such as blukii Key-Fob,
blukii Clip or blukii Drop
Bluetooth Low Energy® 4.2
•
•
Setting of all parameters via blukii Configurator App
Intended Use
Smart Keys are Bluetooth transmitters that communicate with surrounding devices at certain intervals. They are used to
authenticate objects.
•
This document is part of the product. It contains important information for installation and operation. Store it carefully.
Any other use than described in these instructions is not permitted. The manufacturer assumes no liability for personal
•
injury or damage resulting from improper use.
The product must not be modified
•
•
If the product is damaged, it may no longer be used.
Only operate the device within the technical specifications.
•
The product should be operated in dry and dust-free locations.
•
•
The product must not be exposed to strong mechanical loads.
The Key must be protected from strong heat.
•
•
Do not operate the device near flammable gases and vapours.
Do not remove any stickers or labels from the product. These contain important product and safety information.
•
Assembly of Go Mini accessories
The Smart Key Go Mini can be used alone or in combination with numerous accessories. To install the optional accessories,
proceed as follows:
•
Key Fob Go Mini: Peel off the protective strip from the double-sided adhesive tape. Insert the Smart Key with the label
facing up into the Key Fob Go Mini.
•
Clip Go Mini: Peel off the protective strip from the double-sided adhesive tape. Insert the Smart Key with the label facing
upwards into the Clip Go Mini.
•
Drop Go Mini: Place the Smart Key Go Mini in the ground. Put the top on slightly twisted and then turn it to the position
that the outer contour of the top and bottom part are flush.
Manual Smart Key Go Mini
Made in Germany
16.01.2023
Advertisement
Related Manuals for blukii Smart Key Go Mini
Summary of Contents for blukii Smart Key Go Mini
- Page 1 Clip Go Mini. • Drop Go Mini: Place the Smart Key Go Mini in the ground. Put the top on slightly twisted and then turn it to the position that the outer contour of the top and bottom part are flush.
- Page 2 Made in Germany Configuration via blukii Configurator App Parameter changes be made directly via the blukii Configurator app. To do this, proceed as follows: Place your smartphone near the corresponding Key and start the blukii Configurator app Select the blukii for which you want to make changes Then tap in the "Device Info"...
- Page 3 0,9 years Mechanical specifications Enclosure material Copolyester Colour white Protection Class IP62 Flammability rating UL94HB Dimensions 22x7mm Weight Environmental requirements Operating temperature -20°C to +60°C (Lifetime drops sharply under 0°C ) Certifications CE (2014/53/EU, 2011/65/EU) Manual Smart Key Go Mini 16.01.2023...
- Page 4 GmbH declares herewith that the device is compliant with the basic requirements and the relevant rules in directives 2014/53/EU und 2011/65/EU. Service More information about your Smart Key: Contact: https://www.blukii.com/en/contact Further documents: https://www.blukii.com/en/resources Phone: +49 (0) 7724 918506 0 Mail: support@blukii.com hard&softWERK GmbH Bahnhofstraße 10 D-78112 St. Georgen im Schwarzwald Manual Smart Key Go Mini 16.01.2023...
Need help?
Do you have a question about the Smart Key Go Mini and is the answer not in the manual?
Questions and answers