#Map-X2 Integration; Troubleshooting; Technical Specifications - Seagate SYNC2 User Manual

#MAP-X2 INTEGRATION

Connecting #SYNC2 to #MAP-X2 could not be easier, simply follow
the color coding of the cable and plug it into the #MAP-X2 SYNC port,
and you are ready for precision logging!
NOTE: Be sure to setup the #MAP-X2 CONFIG.txt file for utilizing
hotshoe feedback in order to enable the #SYNC2 integration.

TROUBLESHOOTING

In a case that there is no hotshoe logging, please make sure the settings were adjusted accordingly for your platforms and are enabled.
If the logging is still not happening inspect the servo cable for the connectivity and the polarity that it is connected to either of the
devices.

TECHNICAL SPECIFICATIONS

•
Voltage: 3.3 – 5V (range depends on your device's logic level – 5 volts recommended)
• Dimensions: 18.5mm x 18.5mm x 8.5mm
•
Weight: 4 gram (without cable)
© 2019 Seagull UAV All Rights Reserved. 5