LG SDWD24P3 Owner's Manual page 13

en-us_main.book.book Page 13 Thursday, December 22, 2022 4:06 PM
Releasing Drain Hose
Remove the twist tie holding the drain hose to the
back of the shipping brace.
Removable Shipping Brace
The rear shipping brace can be removed if
additional clearance is needed when installing the
dishwasher under a low countertop.
Removing Packing Materials from
the Interior
Remove all packing materials from the interior of
the dishwasher before installing the appliance.
CAUTION
• Take care when opening or closing the appliance
door before the custom door panel is installed.
The door may open or close abruptly without the
weight of the panel.
Checking the Cabinet Panel
This dishwasher is designed to work with a cabinet
front panel (not provided) which slides up as the
door is opened. Before installing the dishwasher,
check the weight and dimensions of the cabinet
front panel you have selected.
• The dishwasher can support panels weighing 5.5
– 24.2 lb (2.5 – 11 kg).
• If the cabinet panel weighs between 17.6 lb (8
kg) and 24.2 lb (11 kg), adjust the door spring
tension to make the door easier to open. See the
Adjusting Door Spring Tension topic.
4 " - 2
2 3 1 /
7 / 8 "
5 / 8 -
m )
2 2 m
( 1 6 -
/ 1 6 "
3 0 1 1
/ 8 " -
m m )
2 8 3
- 7 8 0
( 7 2 0
5.5 lb (2.5 kg) ≤
• For best results, the width of the wood panel
should be 1/4" (6 mm) less than the width of
thecabinet.
Installing Fleece Tape
Attaching fleece tape between the dishwasher
door and the cabinet panel will reduce the friction
when the door slides up and down.
1
Install the fleece tape close to the bracket
openings to make sure the door slides
smoothly.
INSTALLATION 13
m m )
- 6 0 3
" ( 5 9 0
3 3 / 4
≤ 24.2 lb (11 kg)