Extron electronics UTR 104 SP Installation Manual

UTR 104 SP • Installation Guide
The UTR 104 Side Panels provide extra security for the Under Table Rack
by preventing unwanted contact with system products and cabling. These
panels help keep noise at a suitable level for meetings while also providing
a clean and subtle aesthetic.
NOTE: The UTR 104 SP can be installed either before or after the
main UTR installation.

Installing the UTR 104 Side Panels

3
Align the top edge of each panel against the UTR 104 frame.
3
2
Slide each side panel onto the mounting screws
and secure.
Figure 1. Installing the UTR 104 SP
3
3
2
1
Insert four included #10-32 x 0.25 inch Phillips truss-head
2
screws part way into the base of the UTR 104 frame.
1
Insert the six included #6-32 x 1 inch
Phillips pan-head screws into the base
of the UTR 104 frame.
3
UTR 108
4
UTR 104
Side Panel
4
Secure the panels in place with four additiona
mounting screws at the top.
UTR 104
4
1