Advertisement
Installing the Light Bulb
ADULT SUPERVISION RECOMMENDED.
1. Make sure oven is unplugged.
2. Use a Phillips screwdriver to remove the 4 screws
from the light bulb door. Remove door.
3. Install one standard 100-watt bulb.
IMPORTANT!
Do not use long life, soft white,
high efficiency bulbs or halogen, or bulbs of higher
or lower wattage.
4. Replace the door and tighten the screws.
Before You Bake:
1. Wash pans with soap and water and dry thoroughly before first use, and always after baking.
2. The oven should rest flat on a level surface at all times.
3. Make sure both metal doors inside the oven are closed.
4. Plug in oven and preheat for 15 minutes.
Advertisement
