Failure Diagnosis - Kodak DirectView 3MP Manual

Failure Diagnosis

Check the followings before requesting repair.
Symptom
Power doesn't turn on!
(POWER indicator doesn't
light!).
The screen is not
displayed!
Screen doesn't properly
display
The entire screen is not
displayed
Verification
a: Is the power cord
connected?
b: Is the power switch ON?
a: Is the signal cable properly
connected?
b: Is the POWER indicator
orange?
c: Is the computer on?
a: Is the Graphics card
properly installed onto the
computer per the operating
manual?
a: Is the Graphics card
properly set up?
- 18 -
Countermeasure
a: Connect the power cord (see
Pg.12).
b: Turn the power switch on.
a: Properly connect the
appropriate signal cable (see
Pg. 12).
b: Disengage the power saving
mode.
c: Turn the computer on.
a: Properly install according to
the Graphics card
Operating Manual.
a: Properly set it up according
to the Exclusive Graphics
card Operating Manual.