Hakuna Pets 1173 Manual

Paw proof retractable gate

Advertisement

Quick Links

33cm - 180cm
93cm
(13" - 71")
(36.6")
FITS OPENINGS
TALL
Paw Proof
Retractable Gate
Product codes:
#1173, #1174
IMPORTANT! READ AND
INSTALLATION INFO
FOLLOW THESE
INSTRUCTIONS CAREFULLY
AND KEEP FOR FUTURE
REFERENCE.
Complies with safety standard: ASTM F1004-21

Advertisement

Table of Contents
loading

Summary of Contents for Hakuna Pets 1173

  • Page 1 33cm - 180cm 93cm (13” - 71”) (36.6”) FITS OPENINGS TALL Paw Proof Retractable Gate Product codes: #1173, #1174 IMPORTANT! READ AND INSTALLATION INFO FOLLOW THESE INSTRUCTIONS CAREFULLY AND KEEP FOR FUTURE REFERENCE. Complies with safety standard: ASTM F1004-21...
  • Page 2: Table Of Contents

    TABLE OF CONTENTS SAFETY INFORMATION General Maintenance Warnings 04-05 Mountings / Tools Required 06-07 WHAT’S IN THE BOX Parts 08-09 INSTALLATION Gate Placement With Skirting or Baseboard 12-13 Step 1 - 3 To Attach / To Remove OPERATION How to Use How to Tighten Cleaning Instructions / Spare Parts 16-17...
  • Page 3: Safety Information

    SAFETY INFORMATION GENERAL Read this instruction manual carefully and keep it in a safe place for future reference. The correct use and maintenance of this product is essential. MAINTENANCE Regularly check that the gate is functioning correctly, lubricate hinges and moving components.
  • Page 4: Warnings

    WARNINGS...
  • Page 5 WARNINGS...
  • Page 6: Mountings / Tools Required

    SAFETY INFORMATION MOUNTINGS Gate must be installed in a structurally sound opening. Ensure mounting surface (wall, door, stair posts, etc.) is strong, rigid and has an even surface. NOTE: If the safety barrier is used at the top of the stairs, it should not be positioned below the top level.
  • Page 7 SAFETY INFORMATION Select the appropriate fixing method from the list below. HARD WALL MOUNTING BRICK / CONCRETE FOR INSTALLATION Wood Screws Anchor 2. Clear Hole 3. Insert Anchor & Tap 4. Tighten slowly 1. Drill 5mm (3/16”) Pilot Hole WOOD MOUNT- FOR INSTALLATION Wood Screws 2.
  • Page 8: What's In The Box

    WHAT’S IN THE BOX PARTS 1 x Gate Assembly 1 x Gate Mount Installation Guide 1 x Catch Installation Guide...
  • Page 9 WHAT’S IN THE BOX 2 x Gate Mounts 2 x Catch Mounts 3 x Gate Spacers 3 x Catch Mount Spacers 8 x Wall Plugs 4 x 50mm (1”) 4 x 50mm (1”) (For concrete, masonry Gate Mount Catch Mount or brick installation) Screws Screws...
  • Page 10: Installation

    INSTALLATION GATE PLACEMENT Suitable placement of Gate and Catch Mount INSIDE OPENING OR DOORWAY OUTSIDE OPENING OR DOORWAY...
  • Page 11: With Skirting Or Baseboard

    INSTALLATION SKIRTING OR BASEBOARD To help correct for the offset of the skirting board or baseboard, Spacers will be required. Measure the width of your skirting / baseboard and use the closest number of Spacers to fit this width. Each Spacer is 5mm (3/16”) thick. NOTE: Only use spacers for the Upper Gate Mount and the Upper Catch Mount.
  • Page 12: Step 1

    INSTALLATION STEP 1. Hold guides vertically and completely outstretched against mounting surface with the end marked “FLOOR” even with the floor. Mark screw hole positions. Remove templates. NOTE: Leave at least 20mm (3/4”) between Guide and the edge of the opening to ensure gate won’t overhang edge.
  • Page 13 INSTALLATION STEP 2. STEP 3. Align the Upper & Lower Gate Align the Catch Mounts in their Mount on the side you want the correct position on the side you gate to extend from. Tighten want the gate to extend. Screws until each Mount is Tighten Screws until each secure.
  • Page 14: To Attach / To Remove

    INSTALLATION TO ATTACH Attach Gate Assembly to the Gate Mounts by aligning the gate directly above and sliding straight down over Mounts. The gate will lock in place with a “Click”. Check that the Assembly is flush against the wall and is locked firmly in place.
  • Page 15: Operation

    OPERATION HOW TO USE 1. Locked Position Always return button to lock position after each use and before tensioning. 2. Quick Unlock Push & Twist to align with “the dot” icon then release. Pull handle in one fluid movement as stopping will engage lock. 3.
  • Page 16 OPERATION EXTENDING EXTEND ALIGN CLIP RETRACTING UNCLIP RELEASE SLOWLY RETRACT NOTE: When gate is retracting always hold the handle and guide the gate evenly back into its original position. Never let go of the handle when gate is retracting.
  • Page 17: Cleaning Instructions / Spare Parts

    CLEANING INSTRUCTIONS Simply use a soft damp cloth to wipe gate, dry after cleaning. Do not use chemical or abrasive cleaners. SPARE PARTS Gate Mounts Gate Spacers Gate Mounts Scan the QR code to see Spare Parts or visit: hakunapets.com.au/collections/spare-parts...
  • Page 18: Warranty Certificate

    WARRANTY CERTIFICATE Congratulations! You have made an excellent choice of this quality product. Our commitment to quality also includes our service. Should you, contrary to expectations, experience defects due to manufacturing faults, we will provide you with a warranty against defects as follows: WARRANTY The product is guaranteed to be free from defects in workmanship and parts for a period of 12 months from the date of purchase.
  • Page 19: Warranty Card

    WARRANTY CARD DETAILS: Paw Proof Retractable Gate PRODUCT NAME: Black 1173 / White 1174 PRODUCT NUMBER: YOUR NAME: ADDRESS: PHONE: EMAIL: DATE OF PURCHASE: LOCATION OF PURCHASE: We recommend that you keep a copy of your receipt, showing the date of purchase, with this warranty certificate and keep for your reference.
  • Page 20 Freedom to Roam Thankyou ! for making a purchase with Hakuna Pets. Providing our customers with a positive experience is our #1 priority and we value your feedback. If you have anything less than 5 star satisfaction or you require any assistance with spare parts please contact us directly at: www.hakunapets.com/contact-us...

This manual is also suitable for:

1174

Table of Contents