Base
~
Hinge
Supporter
Base Hook
For Authorized Service Technician
8) Hinge Supporter & Rail Assembly
① Remove the Hinge Supporter screw.
② Remove the Hinge supporter from Base
hook.
③ Rotate the screwdriver, after slide it into
the gap between Stopper Roller and Rail
Roller.
Rotate the screwdrive. After slide it into
the gap between Roller and Rail Roller.
9) Sump & Base
① Remove the 6 screws on the sump
cover.
② Remove the 2 screws on the base.
③ Remove the Roller.
④ Remove the Hinge supporter from Base
hook.
⑤ Pull the Tub upside and take it off.
- 26 -