Product Disassembly; Removing Processed Foods; Care And Cleaning; Electrical Equipment Waste Disposal - KitchenAid 5KFP1318 Series Owner's Manual

PRODUCT USAGE (CONTINUED)
USING THE 3-IN-1 FEED TUBE
The 3-in-1 Feed Tube features a 3-piece Food Pusher.
Use the entire Feed Tube and the large Food Pusher to process large items.
NOTE: The unit will not start if food is loaded above the Max fill line. Large pusher must be
inserted to this line in order for unit to operate.
Use the medium Food Pusher in the Feed Tube to process smaller items.
Use the small Food Pusher to slice or shred the smallest, thinnest items.
Use the drizzle hole in the small Food Pusher to slowly drizzle oil or other liquid ingredients
into the Work Bowl.

PRODUCT DISASSEMBLY

REMOVING PROCESSED FOODS

1. Turn the Food Processor off: Press the O/Pulse button and unplug the Food Processor
before disassembling.
2.
Lift the Lid Latch to unlock the Work Bowl Cover, then lift the Cover to remove.
3.
If using the disc, remove it before removing the bowl. Holding the disc by the finger holes,
lift it straight up.
4.
Remove the Drive Adapter and Multipurpose Blade, if using. The Blade will stay in place
on the Drive Adapter when you remove the Adapter.
5.
Lift the Work Bowl off of the Base to remove food from the bowl with a spatula.

CARE AND CLEANING

IMPORTANT: The BPA-free bowl requires special handling. If you choose to use a dishwasher
instead of hand washing, please follow these guidelines.
1.
Press the O/Pulse button, then unplug the Food Processor before cleaning.
NOTE: Allow the appliance to cool completely before putting on or taking off parts, and
before cleaning the appliance.
2.
Wipe the Base and cord with a warm, damp cloth. Thoroughly dry with a soft cloth. Do not
use abrasive cleaners or scouring pads. Do not immerse Base in water or other liquid.
3.
All parts are top rack dishwasher-safe. Avoid laying the bowl on its side. Thoroughly dry all
parts after washing. Use gentle dishwashing cycles such as normal. Avoid high-
temperature cycles.
4. You can store up to two Blades and three discs as well as the Drive Adapter inside the
Work Bowl by using the in bowl Storage Caddy when the Food Processor is not in use.
Wrap the Power Cord around the Cord Storage on the bottom of the Base, then secure the
plug by clipping it to the housing.
NOTE: If washing the Food Processor parts by hand, avoid the use of abrasive cleansers
or scouring pads. They may scratch or cloud the Work Bowl and Cover.

ELECTRICAL EQUIPMENT WASTE DISPOSAL

DISPOSAL OF PACKING MATERIAL

The packing material is recyclable and is marked with the recycle symbol
of the packing must therefore be disposed of responsibly and in full compliance with local
authority regulations governing waste disposal.
. The various parts
9