Advertisement
Quick Links
BEFORE YOU START ASSEMBLING THE YAW2, WE SUGGEST TO ASK A FRIEND, FAMILY MEMBER OR A NEIGHBOR
FOR SOME HELP. SINCE THE PARTS ARE LARGE AND RELATIVELY HEAVY, YOU MIGHT NEED SOME ASSISTANCE.
REMOVE ALL THE LABELS AFTER THE RELEVANT STEP IS FINISHED.
1
REMOVE THE
FASTENING STRIPS
FROM THE ROTATION,
THEN THE TAPE
PROTECTING THE
CONNECTOR ON THE
BOTTOM OF THE 2D.
SKIP THIS STEP IF YOU DON'T HAVE
THE ROTATION PLATFORM.
3
SCREW BOTH SIDES TOGETHER AS
SHOWN ON THE DRAWING.
CONNECTION TEST: TURN THE SIMULATOR ON, WAIT
UNTIL IT LIGHTS UP, THEN TURN IT OFF AND CONTINUE
ASSEMBLY.
5
REMOVE THE FLAT CABLE CLAMPING STRAP
AND HANG THE FLAT CABLE BACKWARDS.
USER
SKIP THIS STEP IF YOU DON'T HAVE
THE ROTATION PLATFORM.
GUIDE
2
PLACE THE 2D ON THE ROTATION WITH THE
SKIP THIS STEP IF YOU DON'T HAVE
THE ROTATION PLATFORM!
4
OPEN BOTH LOCKING MECHANISMS WHERE THE
OPEN SIGN INDICATES IT.
6
MAKE SURE THE 4 ROLLERS ARE IN PLACE.
IF THE ROLLERS FELL
OUT, PUT THEM IN THE
COMPARTMENTS CLOSER
TO THE EDGES OF THE
DEVICE
1 / 4
ARROWS FACING EACH
OTHER.THEN PUT THE
DESIGN LEGS IN PLACE.
Advertisement
Related Manuals for YAW VR YAW2
Summary of Contents for YAW VR YAW2
- Page 1 USER GUIDE BEFORE YOU START ASSEMBLING THE YAW2, WE SUGGEST TO ASK A FRIEND, FAMILY MEMBER OR A NEIGHBOR FOR SOME HELP. SINCE THE PARTS ARE LARGE AND RELATIVELY HEAVY, YOU MIGHT NEED SOME ASSISTANCE. REMOVE ALL THE LABELS AFTER THE RELEVANT STEP IS FINISHED.
- Page 2 PLACE THE PITCH ON TOP AND MOVE IT SUPPORT THE PITCH WITH THE BACK & FORTH, THEN CLOSE THE SUPPORT PLASTIC. LOCKING MECHANISMS WHICH WERE AT THE FRONT SIGN, PUSH IT OPENED IN STEP 4.. BACKWARDS AND THEN PLACE THE SUPPORT ON THE 2D TO HOLD THE PITCH CONNECT THE FLAT CABLE AND MOUNT THE METAL SHEET (IT'S IN THE HARDWARE PACK)
- Page 3 PULL THE CABLES COMING OUT OF THE PITCH MOUNT THE SEAT ADAPTER TO THE BOTTOM OF THROUGH THE HOLES ON THE TOP OF THE THE SEAT ROLL. INSERT THE CENTRAL SHAFT OF THE ROLL INTO THE HOLE ON THE TOP OF THE ROLL AND SCREW IT TOGETHER.