Change Access Point Credentials - Smeg SBC4604WNR Manual

7. Touch the Confirm
the Remote control.
Remote control can also be enabled by
pressing the
right).
The symbol changes colour when the
remote control is enabled
In some screens (e.g. in the Settings
menu and in the pages used to
modify the values of a cooking
functions) it is NOT possible to change
the status of the Remote control by
pressing the
The remote control is disabled in some
cases when the door is opened.
The remote control is disabled in case
of temporary current cut-out.
The Remote control is always on in the
Show Room mode and Demo Mode
(for exhibitors only).
Depending on the status of the
appliance, it is not always possible to
start a new function from the App (for
example, if cleaning is in progress, it is
not possible to start a blast chilling
function from the App).
Even some configuration settings of the
appliance can be changed via the
App.
Activation of Remote control is always
required.
Only one part of the settings will be
available in the App.
Some of these settings can be changed
only if no other functions are activated
on the appliance.
16 - USE
button to activate
symbol (at the top
.
symbol.

Change Access Point credentials

The procedure for changing the Access
Point credentials can be interrupted by
pressing the Return
available on some screens).
To change your Access Point credentials
(network name or password):
1. Log in the App, tapping Log in.
2. In the Settings menu of the product pages
select Change Access Point.
3. Touch the Settings
menu display on the device.
4. (on some models only) Select Connection
.
5. Select SmegConnect.
6. Touch the Change Access Point
button.
Manual mode
1. Select Manual mode.
2. Go to the Wi-Fi settings on the mobile
device and select the "smegconnect"
network.
3. Enter the password "smeg0001" and wait
for the connection to be established.
4. Go back to the SmegConnect App and tap
Next.
5. Press the Confirm
minute.
6. Enter the Access Point data:
• Name of the home Wi-Fi network.
• Wi-Fi password.
The device supports network names
(SSID) up to 32 digits (including
spaces) and WPA2 security settings
(not WEP or WPA).
button (only
button on the main
button within one
91477A874/A