Product Registration; Connection To The Device - Smeg SBC4604WNR Manual

3. A confirmation e-mail is sent to the address
that has been entered when the registration
procedure has been completed.

Product registration

The registration step is formed by alternated
operations to be made in the App
the display of the appliance
you are close to the appliance.
If the "REGISTRATION FAILED"
message is displayed during the
registration process, it means that some
steps of the procedure were not
performed properly or that the
procedure was stopped.
The registration procedure can be
interrupted by pressing the RETURN
button (available on some screens
only).

Connection to the device

1. Tap Log in.
2. In the following screen (Home page), tap
Add product.
3. Select the type of product you wish to
connect (in this case "oven").
There is no need to activate the
"Connectivity" setting on the appliance
beforehand. The procedure starts
automatically.
4. Touch the Settings
bottom right) on the main menu display on
the device.
• (on some models only) Select Connection
.
5. Select SmegConnect.
6. Touch the Registration
14 - USE
and on
. Make sure
button (at the
button.
7. Select the registration procedure for the
required product (Manual or Automatic).
Manual mode
1. Select Manual mode.
2. Go to the Wi-Fi settings on the mobile
device and select the "smegconnect"
network.
3. Enter the password "smeg0001" and wait
for the connection to be established.
4. Go back to the SmegConnect App and tap
Next.
5. Press the Confirm
minute.
6. Enter the Access Point data:
• Name of the home Wi-Fi network.
• Wi-Fi password.
The device supports network names
(SSID) up to 32 digits (including
spaces) and WPA2 security settings
(not WEP or WPA).
7. Tap Next and wait for the confirmation
page.
During this step, the mobile device
automatically reconnects to the initial
Wi-Fi network or data network. No user
operation is required.
8. Wait for the welcome page.
The "REGISTRATION COMPLETED!" displays
on the device.
The Connectivity
area at the top right) remains on solid. The
product registration procedure has been
completed.
Now the display of the appliance shows the
Settings menu to activate the
control (on some models only: within the
button within one
icon (in the information
Remote
91477A874/A