Digiway SW50 Instruction Manual
  1. Manuals
  2. Brands
  3. Digiway Manuals
  4. Controller
  5. SW50
  6. Instruction manual

Digiway SW50 Instruction Manual

Dual motor controller
Hide thumbs Also See for SW50:
1
2
3
4
5

Advertisement

Table of Contents

SW50 Dual Motor Controller
INSTRUCTION MANUAL
- 1 -

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SW50 and is the answer not in the manual?

Questions and answers

Related Manuals for Digiway SW50

Summary of Contents for Digiway SW50

  • Page 1 SW50 Dual Motor Controller INSTRUCTION MANUAL - 1 -...
  • Page 2 All main voltage wiring must be installed by a licensed electrician. 1.2 General features The SW50 is an economical gate controller able to control dual motors with limit switch in a variety of settings. Typical applications include Swing gates, Sliding Gates, Roller shutter doors. Features include the following: •...
  • Page 3 1. OPN open push button 2. CLS close push button 3. PED pedestrian open push button 4. STP stop push button 5. Gate status display, open green, close red 6. Mode selection DIP switch 7. Close motor force( reverse power) 8.
  • Page 4 If DIP4 is on, the gate will auto close after standard auto closed time (30 seconds). If DIP10 is off, the gate will stay opened if no other input to the controller. DIP9 is prior to DIP4 2.5 Timers setting Push Buttons functions Button SET(DIP1)---ON...
  • Page 5 To restore factory setting, turn power off and set DIP1 on, push and hold CLS button, then power on. While hold CLS button, set DIP1 off and then release the CLS button. Now controller restored factory setting from memory. 2.6. Two wires Motors Two wires motor, need diode serial with motor, as the following drawing.

Table of Contents