x2
KEYED
Keys Supplied
ALIKE
Tools Required:
• Hammer drill with correct sized drill bit
• Countersunk fixings
• A hand broom or industrial vacuum
Installation:
1. Read installation guide from beginning to end.
2. Determine exactly where the bollard will
be placed. If you are installing more than one
bollard, mark the ground to ensure that you have
a straight line first.
3. Take the slider receiver plate, drill a guide
hole in the surface, This is to mark the surface
so that you know where to continue to drill.
Continue to drill each guide hole to almost the
entire length of your fixings.
1300 049 246
2
2
MONTHS
MONTHS
PRODUCT INFORMATION &
INSTALLATION GUIDE
Surface Mount Bollard
Slider Removable Key Lock
Specifications
SKU
REMBOLSLID
REMBOLSLIDSS
REMBOLSLIDU
REMBOLSLIDB
Hot Dip Galvanised Steel
Material
Powder Coated Yellow / Black or
Colour
Stainless Steel with
Class 1 Red Reflective Tape
Height: 1020mm
Diameter:
Dimensions:
90mm (Pole) 200mm (Base)
Wall Thickness: 3mm
Base: 4 Mounting Holes
Keys
2 x keys provided
Item Weight
13kg
4 x FREE Countersunk Mounting Bolts
Fixings
Included per bollard
(standard fixings kit)
4. Remove the slider plate and brush or vacuum
away any dust.
6. Secure bollard receiver plate into fixing holes
with countersunk fixings.
8. Slide your bollard in / out of slider receiver
plate to test a couple of time. Lock into place
using keys provided. Do not force open or
turn keys the wrong way to avoid any possible
damage.
www.safetyxpress.com.au
(keyed alike)
(keyed alike ss)
(unique lock)
(black unique lock)