Lubricate all the internal parts with Rock Drill Oil. See table 5-1 on page 16 for suitable
•
Rock Drill Oils.
Cap the backhead and chuck ends.
•
Store the hammer horizontally in a dry environment.
•
RESTARTING
Before restarting the hammer after prolonged periods of inactivity, disassemble and
inspect all internal hammer parts.
If any internal hammer parts have oxidized, use an emery cloth to polish each part.
Wash each hammer part, wipe dry, relubricate with rock drill oil and reassemble the hammer.
FAILURE TO CHECK INTERNAL PARTS BEFORE RESTARTING THE HAMMER MAY CAUSE
SERIOUS DAMAGE TO THE HAMMER.
Page 18
CAUTION
Patriot
125/125HD
02/09/23