Table of Contents
Advertisement
Available languages
Available languages
OPERATING INSTRUCTIONS
Note: the buttons on the control panel mirror
the buttons on the remote control. To select a
mode using the remote, press the MODE button
until the mode you require illuminates on the
control panel.
On/Off
•
Press once on your remote or on the
control panel to turn your fan ON or OFF.
Control Wheel
•
Your fan has 24 different fan speeds.
•
Turn the control wheel clockwise to
increase the fan speed. Turn the control
wheel anti-clockwise to reduce the speed.
The fan speed can be seen on the number
display.
•
The control wheel can also be used to
increase or decrease the time in timer
mode, or to change the setting in natural
mode (outlined below).
•
Alternatively, use the increase/decrease
buttons on your remote to change the
speed/time.
Natural Mode
•
Natural mode is designed to mimic the
natural flow of wind by sporadically
increasing and decreasing the speed of
the fan.
•
Press once to turn natural mode on/off
and use the control wheel to choose your
maximum speed.
•
There are three natural mode speeds
(8, 16, and 24). The fan will increase to
the speed set before increasing and
decreasing on a continuous cycle.
8 of 32 | English
Night Mode
•
Press once to turn night mode on/off.
•
Night mode can only be set in speeds 1-6
and will reduce the fan speed every 30
minutes until it reaches level 1.
Note: the fan will remain ON and in level 1
once this has been reached.
Timer
•
Timer mode can be used to set your fan
to tun on or off automatically.
•
For auto turn on: press the timer button
once, and use the control wheel to set
when you would like the fan to turn on (1
hr increments, from 1-12 hours). The time
will illuminate on the control panel.
•
For auto turn off: press the On/Off button
to turn on the fan. Press the timer button
once, and use the control wheel to set
when you would like the fan to turn off (1
hr increments, from 1-12 hours). The time
will illuminate on the control panel.
Oscillation
•
Press once to activate or de-activate
oscillation
Child Lock Mode
•
You can lock the control panel to stop
your child from using it.
•
To activate child lock, press the child lock
button once. To deactivate the mode,
hold the child lock button until the device
sounds.
USER SERVICING INSTRUCTIONS
Replaceable Fuse
1.
Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling
on cord.
2.
Open fuse cover by using your thumb or a flathead screwdriver to slide open fuse access
cover on side of the plug.
3.
Remove fuse carefully by using a small screwdriver to pry the fuse out of the compartment
by the metal ends of the fuse.
4.
To avoid the risk of fire, replace fuse only with 2.5 Amp, 125 Volt fuse.
5.
Close fuse cover by sliding the fuse access cover back to the plug.
Caution: Do not attempt to replace the plug itself. Discard the product entirely if the plug
itself is damaged.
Fuse
Fuse cover
English | 9 of 32
Advertisement
Table of Contents
