Advertisement
Available languages
Available languages
3.7. In case of power failure
All the above settings for temperature, time, date of the week and
programs remain valid as long as the power supply is not interrupted.
In the event of a power failure, the unit will only retain the ther-
mostat settings, temperature and mode in memory. When the
power is restored, the date and time must be set in order for the
various programs to function properly.
Turn off the unit and disconnect it from the power supply before cleaning
or servicing. Cleaning and maintenance by the user must not be perfor-
med by unsupervised children. Clean the unit at least once a year with a
vacuum cleaner to remove any dust accumulations.
Clean the exterior of the unit by wiping it with a damp cloth and drying it with
a dry cloth. Never immerse the unit in water or allow water to enter the unit.
The main cause of overheating is due to dust deposits or residues in the
unit. Make sure that these foreign bodies are removed regularly. Isolate the
unit from the mains and clean it by vacuuming the air intake and the grilles.
TROUBLESHOOTING & TECHNICAL SPECIFICATIONS
Always isolate the unit from the power supply and allow it to cool before servicing.
- TECHNICAL CHARACTERISTICS
Model / Ref
Nominal voltage 230 V ~
Rated frequency 50 Hz
Rated power
Protection class II
Protection IP
Pilot wire
- IN CASE OF PROBLEMS
Problem
The unit does not
heat up
The unit heats up
continuously
MAINTENANCE INSTRUCTIONS
MONA - WZ1696
1000 W
IPX4
6 orders
Solution
Check that the circuit breakers of the installation are
switched on, or that the load breaker has not cut off the
power supply (if the installation has one).
Select the COMFORT mode.
Increase the temperature setting.
Make sure the unit is not in a draft.
Decrease the temperature setting.
MONA - WZ1702
230 V ~
50 Hz
1500 W
II
IPX4
6 orders
35
MONA - WZ1719
230 V ~
50 Hz
2000 W
II
IPX4
6 orders
Advertisement
