Display Board - Sony XAV-612BT Service Manual

3-17. DISPLAY BOARD

Note 1: When complete DISPLAY board is exchanged, exchanged old
complete DISPLAY board and is destroyed with the hammer, and
throw out it.
2 Remove the solder.
3 Bend the claw in the
direction of an arrow.
– Front panel block rear side view –
ow to install t e s ield
Note 2: Check that the mark of the shield (AP) and the
mark of the DISPLAY
shield (AP) block
total eight lock
DISPLAY board
5 shield (AP) block
block
board are the same directions.
OK NG
unlock
lock
6 DISPLAY board
Note 3: When complete DISPLAY board is
exchanged, refer to "ELECTRICAL
ADJUSTMENT" on page 27.
4
1 screw (T)
(2 4, Silver)
XAV-612BT
1 three screws (T)
(2 4, Silver)
25