Veho MX-1, VSS-301-MX1 - Wireless Speaker Manual

What's in the box

Veho MX-1 Bluetooth Speaker, Multi-lingual User Manual, Micro USB Charging Cable, 3.5mm Line in Cable.

Charging the Speaker

We suggest fully charging the speaker before its first use.

Please use the provided Micro USB cable to charge the speaker from a compatible mains plug or computer USB port, failing to do so may void warranty.

When charging, the LED indicator lights will flash white, the 4 lights will appear individually once the battery level hits different percentage boundaries, when fully charged each of the LED indicator lights will appear solid white.

Check the speaker battery level by quickly pressing the power button, each of the 4 LED's represent 25% charge.

Turning the MX-1 On/Off

To turn on the speaker, press and hold the power button for approximately two seconds; a blue power indicator light will appear and the speaker 'On' tone will sound. If the speaker has previously been paired to a device, they will reconnect automatically.

To turn off the speaker, press and hold the power button for approximately two seconds; the blue power indicator light will switch off and the speaker 'Off' tone will sound.

The MX-1 will switch off automatically if not used for 10 minutes.

Pairing the speaker

Bluetooth

To pair the MX-1 to your Bluetooth device, turn on the MX-1, the speaker will enter pairing mode automatically. From here, enter the Bluetooth settings on your smart device and search for "MX-1", select the speaker and they will pair. The LED power indicator light will turn solid blue when paired.

To disconnect your Bluetooth device from the speaker, quickly press the 'Disconnect' button, the devices will disconnect immediately.

Line-In

Using the supplied 3.5mm audio cable, connect your device directly into the speaker AUX port. The LED power indicator light will turn solid green when connected.

Twin Stereo Pairing

If you have two Veho MX-1 speakers, you can pair them to play simultaneously using one device.

Turn on both MX-1 speakers, ensuring that the speakers do not connect to your Bluetooth device. Press the 'TWS' button on both speakers simultaneously to enter pairing mode, the white LED indicator will begin to flash, this light will turn solid when paired. Once you have paired the speakers, search for "MX-1" on your Bluetooth device and connect to the speaker shown.

USB Output

The MX-1 has a USB Output port, allowing you to charge your devices on the move. Using only the cable supplied with your device, plug in the USB cable into the corresponding speaker port, and then into your device.

Speaker controls

Bluetooth Mode

Press and hold for 2 seconds for power On/Off Quick press for batt ery indicator

Quick press to Play/Pause audio Quick press to answer incoming call Press and hold for 2 seconds to reject call

Quick press for volume up Press and hold for 2 seconds to skip track

Quick press for volume down Press and hold for 2 seconds for previous track

Quick press to disconnect from Bluetooth device. The speaker will automati cally enter pairing mode

Quick press to enter/exit TWS pairing mode

Line-In Mode

Press and hold for 2 seconds for power On/Off Quick press for batt ery indicator

Quick press for volume up

Quick press for volume down

LED status

Support
In the event you need to contact Veho for support or troubleshooting for your MX-1 Speaker visit veho-world.com