Advertisement
item code
part
(A)
PFS-TB-23
(B)
PFS-TB-18
(C)
PFS-TB-5
(D)
PFS-CLLR
(E)
PFS-FOOT
(F)
PFS-KNOB
(G)
PFS-TEE
(H)
PFS-WALL
2" #8 screws - BR, MB or PN w/wall anchors [for part (h) above]
(I)
PFS-DRWR-366
(J)
PFS-WDSLF-36
(K)
PFS-BRKT-8
¾" #8 screws - BR, MB or PN - for attachment of bracket to shelf [part (J) &(K) above]
2" #8 screws-black w/ wall anchors - to attach drawer box and shelf to wall for parts
(I&J) above]
1"x1"x8" aluminum wall bracket with screws and anchors for attaching sink to wall -
supplied when sink is ordered with stand
allen wrench (1), white gloves (1pr), 2"x2"x6" spacers for installation (2), extra set screws (6), installation template (1)
PFS-TD-36-xx-WSD6
Elemental Console Vanity 36"
with 6"h wood drawer and wood shelf
DWG. NO.
PFS-TD -36 WSD6 - Elemental Console Vanity 36
description
23" TUBE
18" TUBE
5" TUBE
COLLAR/SET
FOOT/SET
KNOB w/ screw
TEE
ESCUTCHEON
36"W DRAWER X6"D
36"W WOOD SHELF
8" ANGLE BRACKET
D
B
C
G
D
qty
X
X2
X2
X2
X3
X1
X1
X2
X2
X10
X1
X1
X1
X4
X8
x2
H
D
C
H
J
K
F
D
D
A A
E
E
circle one: CLASSIC
FACET
stand finish___________________
wood finish___________________
DO NOT SCALE DRAWING
©2021 Stone Forest, Inc.
B
G
D
I
Advertisement
Table of Contents
Related Manuals for Stone Forest PFS-TD-36 WSD6 Series
Summary of Contents for Stone Forest PFS-TD-36 WSD6 Series
- Page 1 (1), white gloves (1pr), 2"x2"x6" spacers for installation (2), extra set screws (6), installation template (1) circle one: CLASSIC FACET PFS-TD-36-xx-WSD6 Elemental Console Vanity 36" stand finish___________________ with 6"h wood drawer and wood shelf wood finish___________________ DO NOT SCALE DRAWING DWG. NO. ©2021 Stone Forest, Inc. PFS-TD -36 WSD6 - Elemental Console Vanity 36...
- Page 2 Elemental Drawer Floor level (see back of page for instructions on mounting higher up) Using white gloves provided, carefully layout all brass or nickel fittings on a protected surface. Some assembly will be required using the included allen wrench. Start with the legs. The bottom collars and feet need to be installed to support the drawer 4-8”...
- Page 3 Elemental Drawer Upper position (see front of page for instructions on mounting floor level) Slide one collar onto each leg at the desired height for the bottom of the drawer. Remove the drawer from the cabinet box by depressing the tabs on the drawer glides (one pushes up, the other pushes down) With the help of someone else, carefully slide the empty drawer cabinet down onto the brass legs being careful not to twist it and scratch the legs.
- Page 4 Elemental Wood Shelf Floor level (see back of page for instructions on mounting higher up) Using white gloves provided, carefully layout all brass or nickel fittings on a protected surface. Some assembly will be required using the included allen wrench. Start with the front legs.
- Page 5 Elemental Wood Shelf Upper position (see front of page for instructions on mounting floor level) Slide one collar onto each leg at the desired height for your shelf. Carefully slide the shelf down onto the front legs being careful not to twist the shelf and scratch the legs. With the help of someone else hold the shelf level against the wall.
- Page 6 PFS-TD and PFT-ST Using white gloves provided, carefully layout all brass or nickel fittings on a protected surface. Some assembly will be required using the included allen wrench. NOTE: If you are installing the legs with other components, please see the individual instructions for each component Assemble the legs as shown.
Need help?
Do you have a question about the PFS-TD-36 WSD6 Series and is the answer not in the manual?
Questions and answers