Control Box Reset; Noise Emission - Senator WorkBase User Manual

EN
CLEARANCE WHEN
IN OPERATION
It is the users responsibility to ensure the
space below the adjustable work surface is
hazard and risk free before operation.
• Keep your distance from the table when
adjusting the height.
• Do not place any items underneath the
table when adjusting the height.
• Be aware of other people at the table
during operation.
OVERLOADING
The maximum load to be applied to the
work surface during operation is 80KG.

NOISE EMISSION

The noise emission when in
operation is <70 dB.
06 –
KEEP CLEAR
DURING
KEEP CLEAR DURING
OPERATION
OPERATION
80KG
CE STICKER
Manufacturer, Address, Model, Year of
Manufacture, WEEE Symbol and CE marking
can be seen on the document holder (where
this document is stored) on the underside of
every work surface.

CONTROL BOX RESET

Please note if power is disconnected or lost the
control box will have to be reset.
1. Turn the power on ensuring all the cables
are connected.
2. Press and hold both buttons on the switch
for 6 seconds to fully reset the desk.
3. If nothing happens, unplug the power and
all cables from the Control Box and try
again. Check to ensure that the correct
cables are seated within the inputs.
User Guide
Control
Out
Out
In
– 07