Senator SEN-405-5050K Instruction Manual

5-drawer cabinet & shelved workbench

Always dispose of unwanted tools, accessories and packaging materials in an environmentally

friendly manner.

QUALITY GUARANTEE & WARRANTY

SENATOR TOOLS carry a one year manufacturer's warranty.

SENATOR TOOLS are designed & manufactured

to the highest standards & specifications.

Assuring the quality and performance required by all sectors of industry.

SENATOR TOOLS are fully guaranteed against

faulty materials & workmanship.

Should they be found to be defective, they will either be repaired or replaced free of

charge (fair wear and tear and/or misuse excepted).

Please retain supplier invoice as proof of purchase.

Senator is a registered trade mark of The Kennedy Group Ltd.

THE KENNEDY GROUP, WIGSTON. LEICESTER, ENGLAND, LE18 2FS.

5-DRAWER CABINET

& SHELVED WORKBENCH

ORDER CODE:

SEN-405-5050K

• Cold roll steel body

• Powder coated resin paint

• Durable, high quality finish

INSTRUCTION MANUAL

• 38mm wooden worktop

• Smooth action drawer slides

• 1350(W) x 500(D) x 850mm(H)

Table of Contents

Need help?

Do you have a question about the SEN-405-5050K and is the answer not in the manual?

Page 1 (fair wear and tear and/or misuse excepted). Please retain supplier invoice as proof of purchase. INSTRUCTION MANUAL Senator is a registered trade mark of The Kennedy Group Ltd. THE KENNEDY GROUP, WIGSTON. LEICESTER, ENGLAND, LE18 2FS. © The Kennedy Group Ltd. 07/18...
Page 2 NOTES...
Page 3 Step 9: Attach male drawer slides (M). Push in male slide until spring mechanism rides over LOADING: formed spring stop. Do not load the top drawer first. Do not drop tools into the drawers. Do not completely fill only one drawer. Do not load a drawer from the front.
Page 4 ASSEMBLY INSTRUCTIONS Step 5: Attach the drawer-side back panel (F) and To assemble this product you will require a crosspoint No. 2 screwdriver, a 10mm combination ratchet drawer stops (G). Push the bolt through the spanner and a drill with 4mm wood bit. If available, a 10mm socket wrench may aid access when back panel and the drawer stop before fixing to assembling the unit.