Home Accents Holiday 1003144371 Manual

Safety Information

IMPORTANT SAFETY
INSTRUCTIONS
When using electrical products, basic precautions should always be
followed including the following:
READ AND FOLLOW ALL
a)
SAFETY INSTRUCTIONS.
b) This product is for indoor use only. The electrical rating 0.5 A 120 V
60 Hz.
c) Do not use seasonal products outdoors unless marked suitable for
indoor and outdoor use. When products are used in outdoor
applications, connect the product to a Ground Fault Circuit Interrupting
(GFCI) outlet. If one is not provided, contact a qualified electrician for
poper installation.
d) This seasonal use product is not intended for permanent installation
or use.
e) Do not mount or place near gas or electric heaters, fireplace, candles
or other similar sources of heat.
f) Do not secure the wiring of the product with staples or nails, or place
on sharp hooks or nails.
g) Do not let lamps rest on the supply cord or on any wire.
h) Unplug the product when leaving the house, or when retiring for the
night, or if left unattended.
i) This is an electric product – not a toy! To avoid risk of fire, burns
personal injury and electric shock it should not be played with or placed
where small children can reach it.
j) Do not use this product for other than its intended use.
k) Do not hang ornaments or other objects from cord, wire, or light
string.
l) Do not close doors or windows on the product or extension cords as
this may damage the wire insulation.
m) Do not cover the product with cloth, paper or any material not part of
the product when in use.
n) Read and follow all instructions that are on the product or provided
with the product.
SAVE THESE INSTRUCTIONS.
o)

Pre-Assembly

Package Contents
Part Description
A Tree top
B Tree center
C Tree bottom
D Tree base
E Power Cord

Assembly

CAUTION!
TREE FROM ITS POWER SOURCE BEFORE
ASSEMBLING OR DISASSEMBLING.

Assembling the tree

Please remove protective covers from the base of the pole for each tree
section before assembling.
Step 1. Carefully insert bottom section (C) of tree into tree base. (See
Step 2. Insert the middle section (B) of the tree into the bottom section
Step 3. Insert the top section (A) into the middle section (B). (See Fig.
Step 4. Insert the male connector of the middle section (B) into the
Quantity
1
1
1
1
1
Step 5. Spread branches into place or gently pull branches up and out.
6.5' LED Mirco Dot Pot Tree
SKU# 1003144371
–
ALWAYS UNPLUG YOUR
Fig. 1)
(C). (See Fig. 2)
3)
female connector of the top section (A), the male connector of
the bottom section (C) into the female connector of the middle
section (B) and the male connector of the power supply cord
into the female connector of the bottom section (C) in right
direction properly and tightly according to the magnified
drawing on Fig. 7) . (See Fig.4,5,6,7)
(See Fig. 8)