About Buttons; About Settings - Cycplus M2 User Manual

6.About Buttons

L1 button
L2 button
R1 button
R2 button

7.About Settings

There are 7 pages in settings, long press the right button to enter the
setting, press right button to switch the pages. Details are as follows:
01.Search the ANT+ sensor（C2)
Long pres [R1 button
1
*The screen displays C2 and the ANT+ indicator is flashing.
Press [L1 button
2
*After the right sensor been searched, the screen will back to main
interface and display the sensor data. Time for searching is 10 seconds.
Will quit sensor setting (C2) and return to the main interface if time out.
Supported ANT sensors: Speed sensor, Cadence sensor, Heart rate
monitor, Power meter.
Press
Turn on / Start setting
---
Start / Pause recording
Count lap
Switch display content
Turn on/off backlight
] to enter the setting
] to start searching the ANT sensor
Enter/Quit settings
05
Long press
Turn off
Save record