Enabling High Resolution Satellite Imagery - Garmin GPSMAP 546 Owner's Manual

Using Charts
For settings and options related to Full Screen Map, Waypoints & Tracks,
Other Vessels, and Data Bars, see "Navigation Chart Menu" on
To customize the appearance of the Fishing Chart screen, select MENU >
Chart Setup (page 11).

Enabling High resolution Satellite Imagery

You can overlay high-resolution satellite images on the land, sea, or both
portions of the Navigation chart when using a preprogrammed BlueChart g2
Vision SD card.
To enable satellite imagery:
1. While viewing the Navigation chart, press MENU.
2. Select Chart Setup > Photos.
3. Select one of the following:
• Off—standard chart information is shown on the map.
• Land Only—standard chart information is shown on water with photos
overlaying the land.
• On—photos overlay both the water and the land at a specified opacity.
The higher you set the percentage, the more the satellite photos will
cover both land and water.
NOTE: When enabled, the high-resolution satellite images are only present
at lower zoom levels. If you cannot see the high-resolution images in your
BlueChart g2 Vision region, either zoom in further using the Range (+) key, or
set the detail level higher (page 12).
18
page 9.
Photo Overlay Off
Photo Overlay at 50%
Land Only Photo Overlay
Photo Overlay at 100%
GPSMAP 400/500 Series Owner's Manual