Sealey PW1610 Manual page 4

5. ASSEMBLY
5.1. ATTACH THE MIDDLE EXTENSION LANCE TO WAND FIG'S 1 & 2
Note: When attaching, align the two projections on the lance with the grooves on the wand.
5.2. Attach the adjustable nozzle to the middle extension lance. Note: When attaching,align the projection on the front lance with the
groove on the middle extension lance with the button held.
fig.1
5.3. MOUNTING THE HANDLE FIG.3
Screw the handle tight to the main unit (2 screws). Note: The screws will be packed together with the manual.
fig.3
5.4. FIT WHEELS FIG.4
5.4.1. Align each wheel axle with corresponding shape on the body of the washer. Press to fit.
5.5. MOUNTING THE HIGH PRESSURE HOSE HOOK FIG.5
5.5.1. Screw the high pressure hose hook to the main unit (2 screws). The screws will be packed together with the manual.
Note: All screws are packed in one bag.
5.6. FIT GUN HOLDER AND POWER CABLE HOOK FIG.6
fig.6
5.7. ATTACH & DETACH THE HIGH PRESSURE HOSE FIGS 7 & 7A
Attach: one end of the high pressure hose to the pressure water outlet of the machine and the other end of the high pressure hose
5.7.1.
to the wand. Note: After the high pressure hose is connected, check the connection by gently pulling on the hose to ensure it stays
connected.
5.7.2. Detach: To detach the hose, turn switch to OFF/II position and pull the trigger to drain water from wand. Push the lock button and pull
to detach the high pressure hose.
© Jack Sealey Limited
fig.2
fig.4
fig.7
Original Language Version
fig.5
Push button to remove hose
PW1610 Issue 1 17/11/2022