MILL Sense - Temperature Sensor Quick Start Guide

Also See for Sense:

User manual (8 pages)

User manual (57 pages)

Table of Contents

Contents

1 Before you start
2 Download the Mill Norway App and create an account
3 Follow in-app instructions to connect the device
4 Device Placement
5 Support
6 Quality Levels
7 Fully Customizable
8 Limited liability
9 Terms & conditions
10 Safety and use
11 Warranty
12 Waste disposal
13 Documents / Resources
- 13.1 References
- 13.2 Download manual

MILL Sense - Temperature Sensor Quick Start Guide

Before you start

Make sure:

Your smartphone has a working internet connection

Disable any firewalls or VPN that might block the device from communicating with our server

Bluetooth is enabled

Download the Mill Norway App and create an account

Follow in-app instructions to connect the device

Device Placement

Place the device on a flat surface or attach to a wall using the provided wall mount plate with double sided tape

Place away from vents and windows (minimum 1 meter)

Place away from direct heat sources

Avoid exposure to direct sunlight

Device Placement

Support

Do you have any questions/issues or want to give us feedback?

We are here to help!
appsupport@millnorway.com

Need more information?
A detailed manual is available in local language at
manuals.millnorway.com/sense

Quality Levels

Press the button on the Mill Sense to understand your air quality levels

Fully Customizable

Customize sensor trigger ranges when pressing the button
(using the Mill Norway app)

Change how often Mill Sense uploads new sensor data
(using the Mill Norway app)

Limited liability

Mill International AS shall not be liable for damages related to failure or loss of data arising from incorrect operations and handling of the device.

Terms & conditions

millnorway.com/privacy-millnorway-app

For other languages or additional questions go to millheat.zendesk.com

The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Mill International AS is under license.

Safety and use

Mill sense is intended for indoor use only.

Avoid direct exposure to sunlight for long periods.

Avoid exposure to direct heat sources.

Place away from vents and windows.

Do not disassemble. If the device does not work as specified or you are in doubt, contact your local dealer or visit us at millnorway.com

Use dry cloth to clean Mill Sense.

Tip! Connect Mill Sense to Mill WiFi heaters (except generation 1) for more precise temperature control.

Max transmitting power: ≤20dBm
Frequency range: 2.4 ~2.5GHz

Warranty

The warranty is valid for 2 years. The device will be repaired or replaced during this time should any malfunction occur. The warranty applies if the device is used according to these instructions and the customer can present a purchase receipt. If the device malfunctions in any way, please contact the store where it was purchased or the importer.

Waste disposal

The symbol indicates that this product is not to be disposed of together with household waste. This product must be delivered to a recycling service or container for electrical appliances and electronic equipment. This is to avoid health risks and prevent harm to the environment. Local businesses (or the environmental station in your neighborhood) are required by law to accept and recycle such products, as a means of environmentally sound disposal.