Changing The Fuse In The Vehicle Power Cable - Garmin nuvi 2455LT Owner's Manual

All original settings are restored.
Extending the Battery Life
• Keep your device away from extreme
temperatures.
• Put the device in sleep mode
• Decrease the screen brightness
• Do not leave your device in direct sunlight.
• Decrease the volume
• Disable offers and traffic
• Disable Bluetooth
• Shorten the display timeout time
70
(page 4).
(page 4).
(page 4).
(page 49).
(page 65).
(page
Changing the Fuse in the Vehicle
Power Cable
When replacing the fuse, do not lose any of the
small pieces and make sure they are put back in
the proper position. The vehicle power cable
does not work unless it is assembled correctly.
If your device does not charge in your vehicle,
you may need to replace the fuse located at the
tip of the vehicle adapter.
1
Unscrew the end piece
64).
TIP: You may need to use a coin to remove
the end piece.
2
Remove the end piece, the silver tip
, and the fuse (glass and silver
➋
cylinder)
3
Install a 1 A or 2 A fast-blow fuse.
noTICE
.
➊
.
➌
nüvi 2405/2505 Series Owner's Manual
➊
➋
➌