Table 4.6 Ickdsf Commands For 9900 Contrasted To Ramac - Hitachi 9900 User And Reference Manual

Table 4.6 ICKDSF Commands for 9900 Contrasted to RAMAC
Command
INSPECT
INSTALL
ANALYZE
BUILDX
REVAL
CONTROL
INIT
REFORMAT
CPVOLUME
AIXVOL
72 Chapter 4 Configuring and Using the 9900 Subsystem
Argument Subsystem
KEEPIT RAMAC
9900
PRESERVE RAMAC
9900
SKIP RAMAC
9900
NOPRESERVE, RAMAC
NOSKIP,
NOCHECK 9900
ALLTRACKS, RAMAC
ASSIGN,
RECLAIM
9900
SETMODE (3390) RAMAC
9900
SETMODE (3380) RAMAC
9900
RAMAC
9900
RAMAC
9900
REFRESH RAMAC
9900
DATA, RAMAC
NODATA
9900
RAMAC
9900
RAMAC
9900
RAMAC
9900
RAMAC
9900
RAMAC
9900
Return Code
CC = 12 Invalid parameter(s) for device type.
CC = 12, F/M = 04 (EC=66BB).
CC = 4 Parameter ignored for device type.
CC = 12, F/M = 04 (EC=66BB) Unable to establish primary and
alternate track association for track CCHH=xxxx.
CC = 4 Parameter ignored for device type - skip.
CC = 12, F/M = 04 (EC=66BB) Primary track
CCHH-xxxx found unrecoverable.
CC = 0, ALT information not displayed.
CC = 0
CC = 12 Invalid parameter(s) for device type.
In case of PRESERVE: CC = 12,
In case of NO PRESERVE: CC = 0.
CC = 0 (but not recommended by IBM).
CC = 0
CC = 12, Invalid parameter(s) for device type.
CC = 12, Function not supported for nonsynchronous DASD.
CC = 0
CC = 0
CC = 0
CC = 0
CC = 12 Device not supported for the specified function.
CC = 12, F/M = 04 (EC=66BB) Error, not a data check.
Processing terminated.
CC = 0, Data/Nodata parameter not allowed.
CC=0
CC = 0, ALT information not displayed.
CC = 0, ALT information not displayed.
CC = 0, ALT information not displayed.
CC = 0
CC = 0, ALT information not displayed.
CC=0
CC = 0, Readcheck parameter not allowed.
CC=0
Readcheck parameter not allowed.
CC = 0